Machsupport Forum
Mach Discussion => General Mach Discussion => Topic started by: Fred_evans on May 15, 2016, 12:33:46 PM
-
Hello chaps--
I asked the question before but cant find the thread ( sorry )
I am using mach 3 on a small bench lathe and would like to set the tailstock
as the 3rd axis ( for drilling, centering and other odds and ends).
Please point me to the instructions for doing this.
I am using the standard simple screen that is the default-- and maybe now is the time
to upgrade - all suggestions and hints gratefully recieved
regards
fred
-
Fred,
Link to your other thread:
http://www.machsupport.com/forum/index.php/topic,28992.msg203371.html#msg203371
RICH
-
thanks very much-- especially for the link Rich !
( for my future reference how did you find the link or do you have it on record? )
many thanks
fred
-
Randomly looked through your posts and happened to find it rather quickly.
I don't keep any records at all, but do file some text for on things that may be of value on a particular
subject matter.
RICH
-
so simple !! thank you- sorry for the hassle
fred