Machsupport Forum
Support => Forum suggestions and report forum problems. => Topic started by: dbur525 on May 13, 2016, 07:59:47 PM
-
Im using mach 3 with a G0704 mill
i have set my 7 tools and touched off my Z locations
I established my X and Y zero of spindle and part location
I ran a part and one of the tools is cutting more on one side than the other on both X and Y
so i need to offset this tool like .020 in X and in Y
How do i do that independently of the spindle X Y zero point setting?
On cnc mills at work we have independent wear offset pages so you can easily change a tools location independent of machine Zero
any help would be appreciated .