Machsupport Forum

G-Code, CAD, and CAM => LazyCam (Beta) => Topic started by: gbzflyer on May 20, 2007, 10:51:44 PM

Title: Tab Feature
Post by: gbzflyer on May 20, 2007, 10:51:44 PM

Brian,
I've been using LazyCam Pro with success. Thanks for the great product.
I was wondering if there were plans in the future for adding a tab feature to the program.
Mike

Title: Re: Tab Feature
Post by: Brian Barker on May 21, 2007, 12:33:51 AM

Hello Mike,
I added the tools to calc the points in the path where the tabs should be... now I just need the time to change the drawing class to show the tabs and so on.

Thanks
Brian

Title: Re: Tab Feature
Post by: Quicker on May 21, 2007, 04:15:16 PM

That would be such a great feature.

Q

Title: Re: Tab Feature
Post by: Brian Barker on May 22, 2007, 12:46:46 AM

it will be very cool :)

If you select the tool path and press the S button you will see my tool for testing points on path math ;)

Press S again to turn it off...

Title: Re: Tab Feature
Post by: Chip on May 22, 2007, 02:47:20 AM

Hi, Brian

Just tried it, Thats Cool just needs a couple of eye's, nose,.... and a tail "Rat Tracker" !!

It did lockup hear about half way through, Hears the Info.

Thanks, Chip

Title: Re: Tab Feature
Post by: Brian Barker on May 22, 2007, 09:39:44 AM

That is okay... it is just a tool at this point for testing the math that I have done, I have not added any error checking   :(