Machsupport Forum
Mach Discussion => General Mach Discussion => Topic started by: slovenec on April 30, 2016, 01:36:27 PM
-
Hey everyone.
Need some help using the offsets. I touch a surface movable senzor for setting the Z0. After the first cutting is finished i manual change the tool and click at the auto tool zero. The machine moves to the senzor and measures the tool.
But when i push the cycle start the Z level is not the correct height. I would like that when i change the second tool the machine after measurement starts working at the right level.
What im doing wrong?
Best regards
-
Im using a CSMIO_IPM and the script from the lab site.