Machsupport Forum

Third party software and hardware support forums. => Third party software and hardware support forums. => Topic started by: PenguinAir on April 15, 2016, 01:18:52 PM

Title: UC100 & KL-DB25-5
Post by: PenguinAir on April 15, 2016, 01:18:52 PM
Hi
 
I have a UC100 and the green and blue light are on.
It is connected to a KL-DB25-5 Breakout Board.
The board is power by the USB cable supplied with it.
The board has a red light on. I tried to connect just the e stop switch to it.
P10 to ground.
It does not work for me. As you can tell I am very new to this.
 ???Thanks for any help you provide
Richard
Title: Re: UC100 & KL-DB25-5
Post by: tmccub840840@gmail.com on June 15, 2016, 09:38:38 AM
I have the uc-100. I bought a kit a while back, just got everything working the way I wanted. It works great for me
Title: Re: UC100 & KL-DB25-5
Post by: tmccub840840@gmail.com on June 15, 2016, 09:40:50 AM
Try disabling the e-stop in ports and pins. What kind of breakout board?
Title: Re: UC100 & KL-DB25-5
Post by: tmccub840840@gmail.com on June 15, 2016, 09:42:07 AM
You will need the uc-100 plugin, go to plug in configuration and make sure its green.
Title: Re: UC100 & KL-DB25-5
Post by: PenguinAir on June 17, 2016, 11:59:17 AM
Thanks Everybody
Richard