Machsupport Forum
Mach Discussion => General Mach Discussion => Topic started by: chrsbrbnk on March 02, 2016, 08:24:16 AM
-
The Mach soft ware seems to be set up for printer port port and pin numbers , My DMB4250-8B Breakout Board supports both usb and printerport. How do I designate using a usb port instead and what happens with the port and pin numbers ? I am really a newbie in this area. thanks, Chris
-
The USB port on that board only provides 5V to the board. It's not used to send/receive data.
See pages 8 and 9 in the manual.
http://www.dmm-tech.com/Files/DMB4250-8B_BreakoutVer010106.pdf