Machsupport Forum

Mach Discussion => General Mach Discussion => Topic started by: william55 on February 12, 2016, 01:49:56 PM

Title: Motor tuning
Post by: william55 on February 12, 2016, 01:49:56 PM
Hi
When tuning motors for mach 3 should I be running a g code movement or is jogging with my keyboard ok
Thanks Bill
Title: Re: Motor tuning
Post by: Overloaded on February 12, 2016, 02:00:36 PM
Hi Bill,
 I use the keyboard, but be sure that the Slow Jog is set to 100%  .... or hold the Shift key while jogging.

Russ