Machsupport Forum

General CNC Chat => Building or Buying a Wood routing table.. Beginnners guide.. => Topic started by: archerfrog on January 13, 2016, 07:18:53 PM

Title: Need help in Riverside, CA area
Post by: archerfrog on January 13, 2016, 07:18:53 PM
Greetings,

I have a 5'x10' Multicam router table converted to a Mach3 stepper drive system.  This unit has never worked correctly and turned into a shop ornament.  The machine control is a Campbell Designs controller, and I just installed an ESS, as I believed the problems where noise related.  I'm starting from scratch with this unit, and rebuilding from the computer back.   I would gladly trade table time, tig welding, or beer for some local assistance with this machine.   

Thanks,

Jerry