Machsupport Forum
General CNC Chat => Building or Buying a Wood routing table.. Beginnners guide.. => Topic started by: John252058 on January 13, 2016, 08:39:54 AM
-
I want to build a 3' x 8' bed cnc router. I'm looking for feedback on the Clear Path servo/ stepper motors
-
They're supposed to be pretty good.
-
Sorry to be responding so late to this thread...
I built a MechMate router, table size is 6ft x 12 ft with a 10inch Z. I am driving it with ClearPath servos, NEMA 23's. At first I was unsure whether they would work, but sure enough they work fine.
I also recently converted a Bridgeport Series 1 with ground ball screws and of course Clearpath servos, NEMA 34s. They work great as well. I'll be happy to provide more information if needed. I really like this ClearPath stuff.
regards,
BillT