Machsupport Forum
Mach Discussion => Mach4 General Discussion => Topic started by: usafape on January 03, 2016, 11:32:13 AM
-
Hi all,
This is my first post so bear with me ;D
I've searched but could not find an answer. I am using Mach4 GUI and I can't see the toolpath after loading the Gcode. I am still bringing up my machine so I've never seen it working before. If I use the Static GUI, it will work, but it fails to load my Darwin license. Everything else seem to be working well. Could someone shine a light on this for me?
Thanks,
Fabio
-
So far I have only ever seen this happen when coming out of the screen editor, to rectify this I normally click in the white area just above it.
DazTheGas
-
That doesn't seem to do any good. I notice that the toolpath window in the toolpath tab seems to be working. I am gonna try to upgrade the video driver. Maybe that's the issue???
-
Hi,
You have to have OpelGL 1.5 on your graphics driver or greater for graphics to display.
Regards,
Mauri.
-
Problem resolved after updating my video card driver with the latest.