Machsupport Forum
Mach Discussion => General Mach Discussion => Topic started by: leversole on January 03, 2016, 10:25:33 AM
-
I searched and read a lot of posts on soft limits and nothing really applied...maybe I am overlooking something simple...setting seem right and the machine is homed...
Any suggestions?
-
Not sure what the question is, but do you have Somtlimits turned on?
-
Not sure what the question is, but do you have Somtlimits turned on?
Hmmmm..cant find anywhere to "turn them on"? I have them set up in home/limits, looked in general config, cant find any toggle to enable them. The original question was why is it running fine when I exceed soft limits?
Thanks
-
You need to add a button to turn them on and off.
You also want an LED to show you when they are on or off.
They are probably not turned on.
-
That looks like a modified Aqua screen? The default Aqua has a Softlimits button.
-
Thanks! Once again a simple solution I missed! Probably in the manual!
-
Duh! I should have looked thru the original!