Machsupport Forum

Mach Discussion => General Mach Discussion => Topic started by: ahmedosama on December 28, 2015, 05:27:08 AM

Title: need help ?? mach3 output problem
Post by: ahmedosama on December 28, 2015, 05:27:08 AM

hey
i make my first cnc table and mach3 Output axis go out in other output ,,
x output in relay output ,,
 y output in z output ,,,
 z output in other relay output
and when i open motor output and change step and dir pin ,it'sno change in output
it stay in this case