Machsupport Forum

Tangent Corner => Bargain Basement => Topic started by: Dan13 on December 15, 2015, 11:57:10 AM

Title: CSMIO/IP-A + ENC Module
Post by: Dan13 on December 15, 2015, 11:57:10 AM

Bought it 3 years ago. Was intending to retrofit a lathe. The lathe has since been sold as is and the controller has been lying on the shelf waiting for another possible project which never happened. It has been bench tested and found to be working, otherwise never used. It is the CSMIO/IP-A controller including the ENC module for threading. Asking $630 for the two, not including the postage fee.

Thanks,
Dan

Title: Re: CSMIO/IP-A + ENC Module
Post by: Dan13 on January 08, 2016, 01:40:08 PM

I've been asked in private, so I'll try to clear things up: the unit was bought NEW from CS Labs 3 years ago and has NEVER been used. Only thing I did right after receiving it was connecting it to the PC and playing with the plugin. The modules are still in their original packaging. Will let them go for $600 plus shipping costs.

Dan

Title: Re: CSMIO/IP-A + ENC Module
Post by: Deon Gerber on November 01, 2018, 04:37:58 PM

is this still available seeing the last post was in 2016

Title: Re: CSMIO/IP-A + ENC Module
Post by: Dan13 on November 02, 2018, 12:34:04 PM

No, this was sold.

Dan