Machsupport Forum
Mach Discussion => General Mach Discussion => Topic started by: wakedabed on December 14, 2015, 01:40:40 AM
-
Hello people,
I have a C11GSD breakout board from cnc4pc and cap04 thc, on the breakout board I have 3 relays, I use just the first 2 relays, one for plasma and the second for flame.
When I write dooembutton(110) on my macro its ok the relay and the thc are working, but when I try to write Activate signal(output2) for the second relay, the thc not working!
Please help!