Machsupport Forum

G-Code, CAD, and CAM => LazyCam (Beta) => Topic started by: 9sectsi on December 09, 2015, 02:27:51 PM

Title: lazycam tool path direction
Post by: 9sectsi on December 09, 2015, 02:27:51 PM

hey does anyone know how to change the tool path direction on a drawing in lazycam? thanx

Title: Re: lazycam tool path direction
Post by: RICH on December 09, 2015, 07:46:04 PM

Have a read of the LazyCam manual it's in there somewhere. ???

See,
Tutorial #7 , have a look at page 107........, also page 110.....,
RICH