Machsupport Forum
Mach Discussion => General Mach Discussion => Topic started by: PvdBos on December 04, 2015, 02:56:34 AM
-
Hello cnc profs
I have create my own cnc milling machine with the devices in this topic.
this working fine but I wil controlling my HX-WS400 spindle with the PWM from mach3
this is working but my motor is not spinning on full speed about 60%.
does anyone have experions how to controle this?
I have this configuration:
5Axis port 1 PWM > PWM input HX-WS400
GND > GND
EN/DIS > EN/DIS
P17 > F/R
when i put in Mach3 MDI input m03 s1200 then my spindle is spinning but not full speed m05 stopts