Machsupport Forum

Third party software and hardware support forums. => PoKeys => Topic started by: robertspark on November 24, 2015, 02:11:35 PM

Title: 57E >> Mach3 M10Px/M11Px (Mach4 M62/M63), plus Torch Height Control
Post by: robertspark on November 24, 2015, 02:11:35 PM

Hello,

I've been curious about the Pokeys offerings and tempted to have a go at PoBlocks...

But I was wondering does M10Px/M11Px and torch height control work on the pokeys offerings for both mach3 and mach4?

(I use an ESS for my sins, but remain curious about what pokeys can and cannot do as a motion controller for some of the inbuilt extra sort of functions that the parallel port driver did in M3).

Many thanks,

Title: Re: 57E >> Mach3 M10Px/M11Px (Mach4 M62/M63), plus Torch Height Control
Post by: NeoTO on November 24, 2015, 02:19:11 PM

There is a plan to support motion-synchronized digital output commands, but these are currently not supported.

Title: Re: 57E >> Mach3 M10Px/M11Px (Mach4 M62/M63), plus Torch Height Control
Post by: robertspark on November 24, 2015, 02:39:11 PM

Cheers thanks very much for the info and update,  looks like a great visuallogic programming tool.

 

Title: Re: 57E >> Mach3 M10Px/M11Px (Mach4 M62/M63), plus Torch Height Control
Post by: robertspark on October 17, 2016, 02:55:45 PM

Wondering if motion synchronized digital output commands are supported in mach4 yet with the Pokeys?

thanks, just checking up thats all

Title: Re: 57E >> Mach3 M10Px/M11Px (Mach4 M62/M63), plus Torch Height Control
Post by: NeoTO on October 23, 2016, 01:30:59 AM

The motion synchronized outputs are not supported, but we are working on bringing THC to Mach3. The implementation is mostly ready, but a lot of testing is still needed.

Title: Re: 57E >> Mach3 M10Px/M11Px (Mach4 M62/M63), plus Torch Height Control
Post by: robertspark on October 23, 2016, 01:41:42 AM

Quote from: NeoTO on October 23, 2016, 01:30:59 AM

The motion synchronized outputs are not supported, but we are working on bringing THC to Mach3. The implementation is mostly ready, but a lot of testing is still needed.

Thanks very much for the update, I'll keep my eyes peeled for update announcements,

Title: Re: 57E >> Mach3 M10Px/M11Px (Mach4 M62/M63), plus Torch Height Control
Post by: Asd1234 on November 15, 2022, 12:04:53 PM

Hi

Do the M10 and M11 commands work in Pokeys57cnc now?
In the Pokeys plugin you can choose the commands and the exit.
But nothing is switched