Machsupport Forum

Mach Discussion => General Mach Discussion => Topic started by: pa3gmi on November 21, 2015, 12:02:46 PM

Title: NFS wizzard Gear cutting
Post by: pa3gmi on November 21, 2015, 12:02:46 PM

Hi,
I use Mach3 for some years, but now I have a 4th axis I want to cut Gears.
When I set up the job all seems to work fine except the feeding of the Y axis in the material.
When I look to the G code de Y speed is the same as the Material number, so when I choose Aluminum, the feed is 1 when I use Other , the feed is 9, that is still very slow.
Is this a known bug?
Tanks for Answer.

Rien pa3gmi

Title: Re: NFS wizzard Gear cutting
Post by: Clockworld on January 12, 2021, 03:52:40 AM

Not sure if you are still there - did you ever resolve this as I am getting the same issue....

Matt