Machsupport Forum

Support => Forum suggestions and report forum problems. => Topic started by: birdfalcon on May 08, 2007, 09:29:03 AM

Title: LazyCam 2 Pro Turn Error?
Post by: birdfalcon on May 08, 2007, 09:29:03 AM

I have attached a couple of files. The dxf is from Autocad and the associated turn tap file generated by LazyCam 2.0x.

Mach 3 is hanging when trying to load the tap file.

LC is generating what looks like impossible k numbers in the gcode for Mach3 to process.

Apologies if this is already in hand for fixing or that my dxf is at fault.

Title: Re: LazyCam 2 Pro Turn Error?
Post by: Graham Waterworth on May 09, 2007, 01:51:49 AM

Hi,

this is a known bug and will be fixed for the next update, should not be long.

Graham.