Machsupport Forum

Mach Discussion => General Mach Discussion => Topic started by: native34 on November 14, 2015, 10:58:34 AM

Title: Mach not cutting right
Post by: native34 on November 14, 2015, 10:58:34 AM

I have a strange issue. When I move an axis using mdi to a specific location Mach will move there and repeat every time, but when I'm running a program the part always seems to come out around .010" to large. There are no values in the tool offset fields. Does anyone have any idea what the problem could be

Title: Re: Mach not cutting right
Post by: native34 on November 14, 2015, 09:10:57 PM

Yes it is my encoder