Machsupport Forum

Mach Discussion => General Mach Discussion => Topic started by: wakedabed on November 13, 2015, 01:13:29 AM

Title: Up&Down leds is flashing but Z axis Unmoving! Help!
Post by: wakedabed on November 13, 2015, 01:13:29 AM
Hello people,

I have a C11GSD breakout board from cnc4pc, and now I trying to activate my CAP04 THC plasma, on the mach3 I can see the led of up and down fladhing but no movement of the z axis!
Can someone please help me with this problem?

Thanks so much!