Machsupport Forum
G-Code, CAD, and CAM => LazyCam (Beta) => Topic started by: WTCAREY on November 07, 2015, 12:26:35 PM
-
Having problems posting code to load gcode to mach3. After the options window comes up I get a message saying "file could not be opened" I tried several different lcam files with the same results. Anty help would be appreciated.
thanks
Newbe
-
Mach won't open the lcam file it can only be opened in Lazycam. So open it in LC and then post code to Mach.
RICH