Machsupport Forum
Mach Discussion => General Mach Discussion => Topic started by: Jimchi52 on November 07, 2015, 08:48:05 AM
-
How do figure out the steps to enter into mach.Its been a few years since I built my first machine.I have 1/2-10 5 start acme screws,425 oz motors and the drivers are 1/16 microstep.Thanks
-
You have a number of choices and these are just a few...
There is a calculator here http://www.machsupport.com/forum/index.php/topic,16315.0.html
The Mach manual explains setting up steps per unit http://www.machsupport.com/help-learning/product-manuals/
The Mach3 settings screen has an automatic steps per unit calculator - just follow the on-screen instructions and it's done. ;)
Tweakie.