Machsupport Forum
Mach Discussion => General Mach Discussion => Topic started by: GRAYHIL on November 03, 2015, 05:11:41 PM
-
Hi all
How do you restart a program that you have had to stop, and come out of, from within a sub program loop.
Graham
-
You don't . The BEST you can do is restart outside of the beginning of the sub you were in. Just make sure all the MODALS are set properly to enter the sub.
(;-) TP
-
TP
THANKS for your reply.
Looks like I will be cutting air for a long time!!
Graham