Machsupport Forum
Mach Discussion => Mach4 General Discussion => Topic started by: robertspark on October 24, 2015, 05:01:20 PM
-
Mach3 seemed contained to a 10hz loop for VB scripts and brains
... Does mach4 have an official loop speed?
Is it a function of CPU speed or a set loop rate?
Thanks
Rob
-
As far as ive worked out the lua enviroment inc plc is a wxEvent class and is set in your screen editor, I think default is set at 40ms.
Forgot to add 10hz is the equiv to roughly 100ms
DazTheGas
-
ok ive just checked and its 50, but this can be changed to suit.
DazTheGas
-
Thanks Daz, much appreciated
(found the Mach4 scripting manual.... [pg 11]
http://www.machsupport.com/wp-content/uploads/2014/05/Mach4%20Scripting%20Manual.pdf
bit in there but doesn't explain what the implications could be of making the loop a little faster .... say 100hz or 50hz [I'll give it a go when I'm back next week).
getting enthusiastic for the impending ESS plugin with these new functions [need M62 & M63 working too! + thc (i can live in hope for the next plugin update)]
Rob