Machsupport Forum
Mach Discussion => General Mach Discussion => Topic started by: Beerfizz on May 06, 2007, 11:29:34 AM
-
I tried to download the onecnc post processor, but the link fails.
Does anyone have a copy of this?
Thanks
Phil
-
You should be able to get it from OneCNC... They have been good about that in the past :)
-
I Got my own which I did a few years ag. I don't use the post that OneCNC has, never even looked at it.
You are quite welcome to it if you want it.
Wayne....