Machsupport Forum
Mach Discussion => General Mach Discussion => Topic started by: rmillerauto on October 15, 2015, 07:22:11 PM
-
Can anyone please help me find the sterling style 2.5d probing plug in for mach3?. Or info on any style plugin for mach3 that will first probe the perimeter of a part then digitize the surface of said part within the perimeter only. not like the digitize wizard in mach3 that the perimeter is set in a generic square pattern. I'm currently digitizing a very large half moon shape and the square perimeter is way too much wasted time that is unnecessary. Any help would be great Thanks
-
here is a link to a video of what I'm looking for :) https://www.youtube.com/watch?v=9skopcbhurU (https://www.youtube.com/watch?v=9skopcbhurU)
-
PM the man himself, let us know what we should do. Seems like an awesome plug in!!!
-
i HAVE TRIED TO CONTACT HIM I HAVE GOTTEN NO RESPONSE ??? I'M CURRENTLY WORKING WITH CRAFTY CNC AND THEIR OUTER PERIMETER PROBING ROUTINE. IT WORKS GREAT. BUT I NEED TO FIGURE OUT HOW TO SAVE THE Z AXES PROFILE ALONG WITH THE X-Y IN A .DXF THIS WAY I CAN PROBE AT Z 0 THEN RAISE THE Z AND RUN AGAIN TO THEN CREATE A 2.5 D PROFILE WITH LESS WASTE OF PROBING. ANY THOUGHT ON THIS. ANYONE :)
-
There are bugs in Mach3 that cause his probing macro's to not work correctly. Because of that, he no longer has them available.
-
OK THAT WAS THE ANSWER I WAS NOT HOPING FOR BUT I ASSUMED THAT MIGHT BE WHY. ANY THOUGHTS ON PROB-IT AND THAT PLUG IN/ I USE IT NOW WITH NO ISSUES TO DATE. BUT IT ONLY DOSE ONE LINE IN XZ AND OR XY PLANES WITH THE NEW VERSION. IS IT POSSIBLE TO WRITE A PLUG IN THAT CAN WORK FOR ME OR EVEN JUST A GCODE/MCODE THAT WILL PROBE AND SAVE ALL 3 AXES? POINTS IF I COULD RUN A PERIMETER ROUTINE AND MANUALLY ADJUST THE Z THAT WOULD WORK WELL FOR ME ALSO. OR AM I MISSING SOMETHING ?
-
With ProbeIt, run your perimeter routine, writing to a DXF. When finished with the perimeter, DO NOT CLOSE THE FILE.
Now change to the Surface X/Z page and do your surface probing. The Z data will be written to the original DXF. Now you can close the DXF, and view as 3D in your CAD.
I use Probeit for edgefinding, centering, bore and post indicating, confirming tram and lots more. Best $30 ever.
-
ALL THE X Y Z WERE SAVED FROM JUST RUNNING THE PERIMETER ROUTINE X-Y WHEN I RAISED THE ZED. PROB IT DID SAVE THAT MOVEMENT ALSO :) MY PROBLEM WAS MY 3D SOFTWARE COULDN'T READ IT NOW I NEED A DXF TO STL FILE CONVERTER TO CONVERT THE FILE TO OPEN IN V CARVE PRO OR I NEED TO UPGRADE SOFTWARE :-X