Machsupport Forum

Mach Discussion => General Mach Discussion => Topic started by: mike^3 on October 06, 2015, 09:46:57 AM

Title: Tool changer help?
Post by: mike^3 on October 06, 2015, 09:46:57 AM

Hello,
I have a tool changer on my lathe and need some help...

Its 8 stations, and i have 4 states that come off the tool changer.


Output 6 is the output to start and stop the turret.

Tool    pin 2   pin 3   pin 4   pin 5
1   1   0   0   0
2   0   1   0   0
3   1   1   0   0
4   0   0   1   0
5   1   0   1   0
6   0   1   1   0
7   1   1   1   0
8   0   0   0   1

Can anyone help me set up this in the inputs and tool change macro?

Thank you!