Machsupport Forum

Third party software and hardware support forums. => Mach3 and G-Rex => Topic started by: haroutkhaloian on October 04, 2015, 03:48:23 AM

Title: Mach3 Probe HELP
Post by: haroutkhaloian on October 04, 2015, 03:48:23 AM

Hello
i need your help a little please .. i have a problem with my Mach3 Probe ... to start with i made my own probe and everything it worked fine the LED light was green when the torch touched the plate and the VBscript worked fine as well when i clicked on "ref all home" .. but heres the problem when i try to work on a file on Mach3 the probe doesnt work at all .. its like i didnt even activated it :( i tried to change the vbscript and many other things but nothing worked .... i need help if you could .. as soon as possible
thanks in advance.

Title: Mach3 Probe HELP
Post by: Alan XR8 on October 04, 2015, 08:53:39 AM

Hi, have you assigned the probe in ports and pins?


Alan

Title: Re: Mach3 Probe HELP
Post by: haroutkhaloian on October 05, 2015, 03:06:13 AM

Yes i assigned it to posrts and pins

Title: Re: Mach3 Probe HELP
Post by: RICH on October 05, 2015, 05:26:38 AM

Quote

when i try to work on a file on Mach3 the probe doesnt work at all

Attach your xml file and a gcode file your trying to use.

What program  are you using to generate the gcode for the plasma?

RICH

Title: Re: Mach3 Probe HELP
Post by: haroutkhaloian on October 05, 2015, 05:40:46 AM

here it is ... and i use LazyCam