Machsupport Forum
Mach Discussion => General Mach Discussion => Topic started by: mickmagnum on September 27, 2015, 11:44:07 AM
-
Hello all
Will the demo prg allow you to run a machine albeit restricted
Mick
-
Yes, but limited to 500 lines of g-code, and a few features that are disabled, like Run From Here.
-
Thanks for that Gerry
My problem now appears to be with the parrell port not communicating with the Breakout board the stepper motor is all wired correct .
Using Windows XP on a tower the software is loaded the drivers are ok and the axis movement records on X Y Z
Many thanks for your help to date
Mick Magnum
-
Take it your still having problems, so have you selected the correct parallel port in the config settings and checked the driver is giving the correct pulse.