Machsupport Forum
Mach Discussion => General Mach Discussion => Topic started by: singlesupra on September 23, 2015, 09:20:38 AM
-
Can't seem to find an entire kit for mach3. I'd prefer quality over cheap parts(or a diy). I stay really busy and would prefer to buy the hardware/software already together and ready to go.
Thanks in advance, couldn't find on google
-
http://vi.raptor.ebaydesc.com/ws/eBayISAPI.dll?ViewItemDescV4&item=151369342582&category=12581&pm=1&ds=0&t=1443020151709
What about that?
-
What do you mean by complete kit?
That link is for a complete probing head, which will need mounted in a spindle/holder.
I've got one of the earlier Deepgroove probing heads, and I can't complain about it. Very repeatable, and does what I need it to, regularly probing to better than 0.1mm accuracy. I've got it mounted on a dedicated probing machine, which there is a build thread for in the Show'n'Tell (Your Machines) board.
-
Complete kit meaning all hardware and software.
-
No such thing that I know of. You buy all the pieces that you need and get with it.
(;-) TP
-
Ok. Who makes the best Mach ditizing software and who makes the best digitizing probe for Mach? Just purchased a mill retrofitted with Mach, will be ordering the licence for the conversational tomorrow. I'll also be ordering a cad/cam program from the Mach site .
Also since I purchased this mill with a licensed copy do I still need to order my own licenced copy or is it transfered since I'm buying the machine and control?
Thanks in advance
-
Also since I purchased this mill with a licensed copy do I still need to order my own licenced copy or is it transfered since I'm buying the machine and control?
The official line is that the Mach3 license is non-transferrable. However this is not cast in stone and there are many instances where a transfer of license can be acceptable. Please use the contact form to contact licensing for full details. http://www.machsupport.com/contact-us/
Tweakie.
-
This is a nice piece of software / plugin I've found useful http://www.craftycnc.com/probe-it-wizard-mach3/
Another one is scanything (but it's not a probe software but camera scanner) http://www.sheetcam.com/Scanything/index
Rob
-
Probe-it or sterlins probing? I like the idea of sterlins probing the parimeter and then only probing that area vs a set "box"
Anyone used both?