Machsupport Forum
Mach Discussion => General Mach Discussion => Topic started by: NickF on July 28, 2015, 07:54:03 PM
-
Hey Guys
Im new to this forum and also New to CNC machining. (So please forgive me if i ask Dumb questions)
I am trying to set up my 4th axis i have a rotating spindle on my machine.
I have made a simple project in mesh cam and if i run the code on the machine in offline the DRO says the A axis moves, but when i run the machine in normal operation it dose not move. is there some settings in Mach3 I'm missing? Any help much appreciated :) :)!!!
Nick