Machsupport Forum

G-Code, CAD, and CAM => G-Code, CAD, and CAM discussions => Topic started by: amnon on June 21, 2015, 07:36:12 AM

Title: Problem with simulation
Post by: amnon on June 21, 2015, 07:36:12 AM

Hej ,

I use SolidCam with postprocesor sent by bscandanavia from this forum, and my simulation suddenly crashed. Can someon help me.


Best Regards
Amnon

Title: Re: Problem with simulation
Post by: Graham Waterworth on June 21, 2015, 02:38:43 PM

I would try the SolidCAM forum