Machsupport Forum

Support => Downloads => MACH TOOL BOX => Topic started by: Robbo on June 09, 2015, 04:46:30 AM

Title: X6-1500GT-USB
Post by: Robbo on June 09, 2015, 04:46:30 AM

I am the proud owner of a new Router (X6-1500GT-USB) From http://www.omiocnc.com/
I am still using Mach3 in demo mode, everything seem to be working.
But, how do I create my own Wizards?
I have written and modified some Macros; however i would like to run my Macros as a Wizard, any ideas.

Is it that I am still using Mach3 in Demo mode that some of the things do not work?
I wish to modify my screen, How do I go about it?

Background:
   Fanuc Programmer/setter for over 30 years (macro A and B fluent)
   Vb.net Hobbyist (know my way around)
   Retired due to bad health, and Board to hell


Alan Robbo

Title: Re: X6-1500GT-USB
Post by: RICH on June 09, 2015, 06:30:46 AM

Alan,

Have a read of the Mach Customization Guide ( has basic info for creating Wizard's and also the Mach Macro Programmers reference Manual.

I use Mach Screen for modifying screens. Here is the link:
http://www.kd-dietz.com/klausphp/
RICH

Title: Re: X6-1500GT-USB
Post by: Robbo on June 09, 2015, 11:24:26 AM

Rich,
Thank you, what a lot of reading.

Title: Re: X6-1500GT-USB
Post by: RICH on June 09, 2015, 01:56:42 PM

It's not the reading so much as the understanding that counts. ;)

It's all just a learning trip and one which I should have taken  a long time ago.

Have fun,
RICH