Machsupport Forum

Mach Discussion => General Mach Discussion => Topic started by: routout on June 09, 2015, 03:07:45 AM

Title: The Blue screen
Post by: routout on June 09, 2015, 03:07:45 AM

Hi ,sorry i posted in the wrong place hope this is rite.
So I have the Blue screen installed and was hoping to use the touch test centering ,when I hit the button it is traveling very slowly I was wondering where to change the speed in the script.I have the Z Plate offset at 8.0 mm and that is working fine at the size of my touch plate auto tool zero works as well ,just the slow speed on centering and + or - X & Y  .Hope someone can help cheers John.

Title: Re: The Blue screen
Post by: ger21 on June 09, 2015, 07:55:35 AM

Operator > Edit Button Script, and click the button.

The VB Script window should open with the code in it.

It should have some F********* feedrates in there.

Title: Re: The Blue screen
Post by: routout on June 09, 2015, 05:06:56 PM

Thank's for that was looking at the wrong script ,got the one with XY in  it now ,Thank's to all who contribute it has made my understanding of Mach a whole lot easier the more I use it the better I get.cheers John.