Machsupport Forum

Mach Discussion => General Mach Discussion => Topic started by: makcnc on June 05, 2015, 06:56:53 AM

Title: pls help ........... with the limit switch
Post by: makcnc on June 05, 2015, 06:56:53 AM

hi all
i'm trying to set up limit switches with strategy of only two limit for single axis as ++,-- ,home
i have read the manual but i want to understand the wiring better and the configuration
also i tried the override limit switch by auto in the sittings screen but  how it could be made manually
that the manual does not cover this will
please help and refer if there is a supporting vedio ???

Title: Re: pls help ........... with the limit switch
Post by: Charlie_M on June 06, 2015, 08:30:06 PM

 Hi this is how I have my limit switches on my router. reason being I hve more switches then inputs. I just simply wire them is series. similar to this.

http://www.mycncuk.com/attachment.php?attachmentid=5351&d=1329160037

Title: Re: pls help ........... with the limit switch
Post by: makcnc on June 17, 2015, 09:05:04 AM

thanks alot man that is very helpful

Title: Re: pls help ........... with the limit switch
Post by: Charlie_M on June 17, 2015, 05:35:11 PM

Hi Glad I could help.