Machsupport Forum

Mach Discussion => General Mach Discussion => Topic started by: Fred583 on May 23, 2015, 12:47:04 AM

Title: Wrong Plug-In Installed
Post by: Fred583 on May 23, 2015, 12:47:04 AM

In my haste to get my Mach3 wuith USB smoothstepper working I managed to download/install the smoothstepper LAN version. Then when I started Mach3 it asked me to select the relevant driver. I chose that driver and clicked the 'don't ask me again' checkbox, and immediately realised the error of my ways when it prompted me for the IP address.

Having now installed the correct USB driver, Mach3 continues to pester me for the LAN configuration when I start up. I want to use the USB driver instead, but because I selected the 'do not pester me again' checkbox I don't get that choice.

How can I undo this situation?

Title: Re: Wrong Plug-In Installed
Post by: dude1 on May 23, 2015, 01:10:56 AM

delete ess plug

Title: Re: Wrong Plug-In Installed
Post by: Fred583 on May 23, 2015, 05:18:51 AM

Thanks - could you possibly be a little more explicit? The ESS plug doesn't appear in the Windows program list so I can't delete from there. I assume this might be a file someplace.

Title: Re: Wrong Plug-In Installed
Post by: dude1 on May 23, 2015, 06:44:11 AM

c\mach3\plugins\ESS_v10r2d1d.dll or what ever version of the ESS plug you have

Title: Re: Wrong Plug-In Installed
Post by: Overloaded on May 23, 2015, 07:25:40 AM

Quote from: Fred583 on May 23, 2015, 12:47:04 AM

How can I undo this situation?

 :)

Title: Re: Wrong Plug-In Installed
Post by: Overloaded on May 23, 2015, 07:26:15 AM

... then restart Mach.

Russ

Title: Re: Wrong Plug-In Installed
Post by: Fred583 on May 23, 2015, 09:21:53 AM

Quote from: daniellyall on May 23, 2015, 06:44:11 AM

c\mach3\plugins\ESS_v10r2d1d.dll or what ever version of the ESS plug you have

That did it - thanks.