Machsupport Forum
Mach Discussion => Mach Screens => Screen designer tips and tutorials => Topic started by: alexander.b on May 16, 2015, 10:25:11 AM
-
I am testing Mach4.
I would like to be able to load one of a few gcode files on a custom mach4 screen and then use control buttons to cycle start, pause, stop etc the selected gcode file.
I noticed there is no listbox control.
Can this be done using buttons that I assign a gcode file to?
If the operator selects a specific button then the corresponding gcode file will load ready for cycle start.
Any help would be appreciated.
thanks
Alexander