Machsupport Forum

Mach Discussion => General Mach Discussion => Topic started by: bteigrob on May 05, 2015, 10:05:09 PM

Title: 620 in-oz motors not working
Post by: bteigrob on May 05, 2015, 10:05:09 PM

Anyone familiar with the 8 wire stepper motors? I am getting signal to my steppers from the driver, but the motors just hum and they stay locked. Not sure what my problem is.

Title: Re: 620 in-oz motors not working
Post by: RICH on May 06, 2015, 07:36:58 AM

Have a read of the info on the Gecko site as to amp settings and wiring configurations.

RICH