Machsupport Forum

G-Code, CAD, and CAM => G-Code, CAD, and CAM discussions => Topic started by: Garyh on April 22, 2007, 08:13:36 AM

Title: Powermill to Mach3 post
Post by: Garyh on April 22, 2007, 08:13:36 AM

Can any one help ?

Title: Re: Powermill to Mach3 post
Post by: Graham Waterworth on April 22, 2007, 08:17:20 AM

In what way?

Title: Re: Powermill to Mach3 post
Post by: Garyh on April 22, 2007, 08:20:39 AM

Post processor for powermill

Title: Re: Powermill to Mach3 post
Post by: Graham Waterworth on April 22, 2007, 08:22:16 AM

The fanuc 6 one will be very very close. Try it.

Title: Re: Powermill to Mach3 post
Post by: Garyh on April 22, 2007, 08:25:23 AM

Many thanks, will give it a go cheers.

Title: Re: Powermill to Mach3 post
Post by: lukecnc on May 10, 2012, 04:17:04 AM

There is some one that have fanuc6 post processor for powermill, I have already worked with fanuc6m but there is some problem using it. Can any one help me? thanks

Title: Re: Powermill to Mach3 post
Post by: Graham Waterworth on May 10, 2012, 04:20:54 AM

The DelCAM forum is your best bet.

http://forum.delcam.com/

Graham