Machsupport Forum

Mach Discussion => General Mach Discussion => Topic started by: JohnM34 on April 28, 2015, 11:27:48 AM

Title: Setting up Auto Z Touch Plate
Post by: JohnM34 on April 28, 2015, 11:27:48 AM

I bought this auto z touch plate

http://www.cncrouterparts.com/auto-z-touch-plate-instructions-p-291.html

I am not too familiar with the electronics so i am not sure how to hook it up. I am attaching a few pics of inside my electronics cabinet and hopefully someone can point me in the right direction. Thanks in advance

Title: Re: Setting up Auto Z Touch Plate
Post by: ger21 on April 28, 2015, 11:52:31 AM

I can tell you that it doesn't get connected to anything you've show in the pictures. You might want to call CNC Router Parts.

Title: Re: Setting up Auto Z Touch Plate
Post by: JohnM34 on April 28, 2015, 01:25:04 PM

So I am assuming it would connect here somewhere since it is the only area left?

Title: Re: Setting up Auto Z Touch Plate
Post by: ger21 on April 28, 2015, 01:27:13 PM

Looks like it, yes.

Title: Re: Setting up Auto Z Touch Plate
Post by: JohnM34 on April 28, 2015, 01:29:55 PM

Ok, that is a start now just a matter of what exactly to hook it up to

Title: Re: Setting up Auto Z Touch Plate
Post by: dude1 on April 28, 2015, 07:30:36 PM

look in the manual look through this sight its all there input pin that`s not used plus you need the code