Machsupport Forum
G-Code, CAD, and CAM => LazyCam (Beta) => Topic started by: brentwford on April 21, 2007, 08:43:59 AM
-
Hi guys; Here are 2 screen shots. One of the autocad file I want to cut and a second of the LazyCam import. Anyone know why this is happening? I've been messing around with this on and off for a week now and haven't made any progress. :-\
Thanks and have a good one.
-
Save the dxf out of acad in R12 or 2000 format and try again.
Graham.
-
Hi; I tried exporting in both r12 and 2000 dxf format. Still loads into Lazycam the same.
thanks for the suggestion though.
-
Post your .dxf file and we will have a look.
Graham.
-
Hi and Thanks; The dxf is attached.
-
It loads fine into my CAD system, no problems found in the file, but I can't get LCAM to load it correctly ether, I think this is one for Brian.
I have sent it to him for his comments.
Graham.
-
Just upgraded to 2.0.065 and it load fine.
Graham.
-
Hmmm, I just installed 2.0.065 of Mach3 and the LazyCam version is listed as 2.0.060. Does not work here, same problem. I wouldn't mind trying the Beta of LazyCam but can't seem to get logged in to the FTP site. Thanks so much for the help.
-
Hi, Brent
I had the same problem with your file.
Loaded it in Turbo-Cad Exploded it and it loads fine in LC now.
Try this one below.
Hope this Helps, Chip
-
Wow! that did it! Guess I need to get a copy of TurboCad! Thanks again for all the help guys.
-
Hi, Brent
New LazyCam is going to be out next week or so with new inporter that should work with later ACAD DXF and more.....
Thanks, Chip
-
This should be fixed with the new version that we have :) ... The new importer has a bug and we are waiting for the bug fix at this time... Man is it ever a ton of work to get all this stuff working :)