Machsupport Forum

Mach Discussion => General Mach Discussion => Topic started by: Hobbyist on April 18, 2015, 01:35:01 PM

Title: Connection advice
Post by: Hobbyist on April 18, 2015, 01:35:01 PM
I am upgrading several custom circuits on my lathe with an M36 selector board from CNC4PC.  It is unclear to me from the documentation how to properly connect a C15 spindle relay, a C3 spindle index and a momentary switch to re-enable Mach after a reset. 

Can all of this be done through the M36 or do I need to use another port on my ESS?

Thanks

John