Machsupport Forum
Mach Discussion => Brains Development => Topic started by: SSPW on April 14, 2015, 11:11:12 AM
-
I am wondering if anybody can tell me the how IsMoving reacts after an EStop is triggered.
When an EStop is triggered, i assume Mach3 decelerates all the axises at the maximum rate, and when the axis is stopped, then resets IsMoving.
Can any of the brain experts confirm this?
I would like to set an output when an estop triggers and reset the output after short delay on the IsMoving is reset.
-
Estop does NOT deaccelerate the axis it simply dumps the buffer . You will loose positon .
(;-) TP
-
NEVER push the big red button while moving, unless you really really really need it to stop!