Machsupport Forum
Mach Discussion => General Mach Discussion => Topic started by: highpockets on April 04, 2015, 04:08:23 PM
-
I have my new CNC router up and running, it's a PDJ 2626 running Mach3.
I have ref home on X and Y working just as they should, but Z is another story. If I turn on Z Home in Port & Pins Inputs when I click on Ref All Home the Z axis goes down instead of up. If I reverse the motor then it zeros to the top but in operation the Z axis moves in the wrong direction. I've tried every setting I can think of I'm just missing something and need help....
Here are my configuration settings.
(http://i795.photobucket.com/albums/yy240/jbourg/Image%20001_zps7dgah8ud.jpg)
(http://i795.photobucket.com/albums/yy240/jbourg/Image%20002_zpsckjwmt9g.jpg)
(http://i795.photobucket.com/albums/yy240/jbourg/Image%20003_zpscqpedlcb.jpg)
-
Take the tick out of Home Negative for the Z axis, see pic. You want the Z to home in a positive direction, ie up the way.
Hood
-
Hood, You da Man!!!
Works great!!!