Machsupport Forum

General CNC Chat => Share Your GCode => Topic started by: Kipper on April 04, 2015, 04:07:08 PM

Title: Maglev Disc Gcode
Post by: Kipper on April 04, 2015, 04:07:08 PM
Here's the gcode for a disc to hold magnets I made for a buddy of mine to perfect perpetual motion......could take a while!

It's a radial toolpath in Metric.

You'll need a 6.35mm ballnose cutter (1/4" in old money)

It's cut out of 18mm MDF and around 250mm Diameter as I recall.

I've attached the .iges file too....I hope :D

(https://lh3.googleusercontent.com/-Yb44ouLBmwE/VQyTFD-MLFI/AAAAAAAAHz4/5UmjV6JyNTI/w426-h757/20150320_211124.jpg)