Machsupport Forum

G-Code, CAD, and CAM => LazyCam (Beta) => Topic started by: ynneb on March 04, 2006, 09:38:27 PM

Title: Lazy Cam (Beta)
Post by: ynneb on March 04, 2006, 09:38:27 PM
As many of you may be aware, the Beta of lazy Cam has been released.
You can download it from here http://www.machsupport.com/LazyCam.zip

Let us know your thoughts / problems / praises.

This section should provide a good collective feedback for all your input.
Title: Re: Lazy Cam (Beta)
Post by: Brian Barker on March 05, 2006, 08:05:13 AM
Please post any files that are giving you trouble and please explane how you are getting the problem ...  This first release is to see how you like the workflow. I will fix any bugs that I can as well  ;D

Have fun breaking it  :o
Title: Re: Lazy Cam (Beta)
Post by: JFettig on March 06, 2006, 07:46:55 PM
There never was a problem other than the problem that people dont have mach3 installed:) maybe the licence is needed too.

Jon
Title: Re: Lazy Cam (Beta)
Post by: Brian Barker on March 07, 2006, 10:47:02 PM
LazyCam 1.01 Update here: http://www.machsupport.com/LazyCam.zip

There are a few very small updates:
1. The move button will update all of the Leadin properties now
2. The Rapid Height in the layer dialog wouldn't take a none integer value... (No so good if you cut in inch)

I am working on the Dot Width Diffusion, Drilling code (Points), and there is a small bug putting on a leadin on some chains...
All and all it seems to be going well, I can see that the base code that Art and I worked on is going to be very robust!

Thank you to everyone that is helping with the testing
Brian