Machsupport Forum

G-Code, CAD, and CAM => LazyCam (Beta) => Topic started by: ta1dr on April 12, 2007, 08:24:18 AM

Title: is there anybody that can use pocket tool ?
Post by: ta1dr on April 12, 2007, 08:24:18 AM

Hi all
I am licenced user I have been trying to use pocket tool for 2 days but I cant do it.

is there anybody that can use pocket tool ?
Ahmet
from TURKEY

Title: Re: is there anybody that can use pocket tool ?
Post by: split63 on April 12, 2007, 12:09:27 PM

It does not work for me either.  It may be that the code is not done yet.

Title: Re: is there anybody that can use pocket tool ?
Post by: Brian Barker on April 12, 2007, 01:45:08 PM

Please be kind and upload the DXF that you are trying to offset and tell us the amount that you are trying to offset.

Title: Re: is there anybody that can use pocket tool ?
Post by: split63 on April 12, 2007, 01:57:32 PM

Brian,

Can you send me your email address.  I can email the file to you.  Although there is nothing special about it.  A plate with three 0.4" holes.   A 0.25" diameter end mill, so the offset is 0.25", though I have tried smaller offsets with the same results.

Title: Re: is there anybody that can use pocket tool ?
Post by: Brian Barker on April 12, 2007, 05:01:23 PM

you will see there is a icon under the dog that is barking ... click on that and you will mail me :)

Thanks
Brian