Machsupport Forum

Mach Discussion => General Mach Discussion => Topic started by: tnbndr on March 04, 2015, 02:37:35 PM

Title: Mach 3 StartUp Message
Post by: tnbndr on March 04, 2015, 02:37:35 PM

Just started today after cutting for a while. When I start Mach 3 I get the message "Wake up Client Board does not reply". I have tried rebooting, new cables, Any ideas of what the issue may be.

Title: Re: Mach 3 StartUp Message
Post by: Mc2 on March 04, 2015, 04:49:48 PM

Your smooth stepper needs to be powered down for a reset. Then power smooth stepper back up and then run mach 3.

Jim.

Title: Re: Mach 3 StartUp Message
Post by: tnbndr on March 05, 2015, 08:50:09 AM

Tried that and several other things. Looking at Ethernet card now, in for diagnostics.

Title: Mach 3 StartUp Message
Post by: Mc2 on March 25, 2015, 10:45:36 AM

Either no power or bad smoothstepper.