Machsupport Forum

Mach Discussion => General Mach Discussion => Topic started by: 1dbweldor on March 01, 2015, 02:10:08 PM

Title: 4th help
Post by: 1dbweldor on March 01, 2015, 02:10:08 PM

I have a Shizuoka AN-S that I retrofit to MachMotion Mach3 kit a while back. Now I want to retrofit my 4th to be fully interfaced with my controls. Which motor and driver would I want to look at? My 4th is a Yuasa 8" platter.